Explore our premium grade kiln-dried teak tables, integrated charging accent units, slatted exterior stands, and rustic roots—precision-machined to your exact specifications.
In-depth technical criteria on moisture equilibrium, European CE & SVLK legal frameworks, mechanical tensile performance, and sustainability imperatives for professional B2B procurers.
Procurement professionals evaluating contract furniture understand that not all teak is created equal. Genuine Indonesian teak (Tectona grandis), harvested from state-managed plantations supervised by Perum Perhutani, features an uncommonly dense concentration of natural tectoquinones and organic rubber resins. These naturally occurring chemical biopolymers render the cellular matrix impervious to moisture absorption, wood rot (Basidiomycota), fungal degradation, and subterranean termite infestation.
For European and North American buyers, achieving verifiable CE Certification and EN 581 standards (outdoor furniture mechanical safety and structural durability requirements) hinges upon timber seasoning. At Teratai’s workshop in Jepara, our timber undergoes a computer-controlled two-stage dehumidification and kiln-drying cycle over 21 to 28 days. We lower moisture content strictly to 10%–12% for interior environments, and 12%–14% for humid or coastal exterior environments. This prevents anisotropic radial shrinkage, cupping, checking, and structural failure when pieces move between humid tropical manufacturing facilities and climate-controlled European buildings.
| Wood Specification Grade | Heartwood / Sapwood Content | Grain Density & Alignment | Natural Oil Saturation | Recommended Commercial Use |
|---|---|---|---|---|
| Grade A (Perhutani Mature Teak) | 100% Mature Heartwood, 0% Sapwood | Tight, Straight, Uniform Annual Rings | Maximum (Tectoquinone Saturated) | Luxury Hotels, Coastal Yachts, Severe Climates |
| Grade B (Semi-Mature Plantation) | >80% Heartwood, Minimal Edge Sap | Moderate Grain, Light Honey Coloration | Medium Natural Resin Density | Covered Patios, Commercial Dining, Residential |
| Grade C (Immature / Thinned Timber) | <50% Heartwood, Significant Sapwood | Irregular Grain, Blotchy Tones | Low, Requires Chemical Impregnation | Low-cost mass retail (Not Recommended for Export) |
A common failure point in contract hospitality furniture occurs where legs join the apron or horizontal cantilever surfaces. Cheaper factories rely on metal angle brackets, wood screws, or simple dowel pins held together by water-soluble adhesives. Our Jepara craftsmen utilize deep mortise-and-tenon architectural joints reinforced with kiln-dried teak dowels and polyurethane D4 water-resistant adhesives conforming to EN 204 Class D4.
This ensures that when a guest rests heavy luggage or exerts lateral shear pressure on an accent side table or cantilever sofa desk, the structural load distributes along the solid wood fibers rather than putting shearing pressure on mechanical fasteners. Furthermore, for hybrid models containing powder-coated matte aluminum frameworks, all hardware components utilize marine-grade 316 stainless steel to eliminate galvanic corrosion risks in coastal environments.
How the upcoming European Deforestation Regulation (EUDR), smart-space demands, and circular lifecycle design are transforming contract furniture manufacturing.
The implementation of the EU Deforestation Regulation (EUDR) mandates non-negotiable geolocation polygon coordinates for every harvested log. Sourcing without indisputable SVLK certification risks impoundment at Hamburg or Rotterdam ports.
End tables are evolving from passive stands into high-utility work hubs. Contract interior designers demand discreetly integrated Qi wireless charging pads, flush AC outlets, and waterproof wiring conduits for modern hospitality guests.
Luxury resort chains are shifting away from stark monochromatic plastics toward organic biophilic aesthetics. Incorporating genuine reclaimed teak root stumps beneath ultra-clear tempered glass satisfies both ESG audits and guest experiential desires.
Operating directly from Jl. Raya Soekarno Hatta KM.5 No.95 in Jepara, Central Java, Teratai Furniture has operated continuously as a premier family-run woodworking atelier since 1995. Unlike non-manufacturing trading brokers who act as middlemen with hidden subcontracting margins, we build your furniture directly on our shop floor.
Our dedicated workshop team features four master woodcarving craftsmen, five specialized hand-finishers, and two dedicated in-house QC/QA inspectors, accompanied by an agile sanding division that scales seamlessly to each project. For over thirty years, our bespoke manufacturing has directly supplied contract importers, luxury retail chains, and boutique resort architects across the United States, New Zealand, and Germany.
Every board is legal, certified under Indonesia’s national SVLK framework (V-Legal), fulfilling strict EUTR and Lacey Act requirements.
Full 20ft/40ft containerloads are standard, but consolidated LCL shipping and partial container staging are always accommodated.
For multi-container projects, every single container is inspected, photologged, and formally approved by you before balance payment and departure.
Comprehensive answers regarding export compliance, minimum quantities, lead times, custom shop drawings, and payment safeguards.
We are the direct manufacturer. Teratai Furniture is a family furniture atelier and workshop founded in Jepara, Central Java in 1995. Our direct workshop workforce consists of four master joiners, five finishing artisans, and two specialized QC/QA inspectors, supported by an elastic hand-sanding division. There are no trading intermediaries or brokerage fees embedded in our direct quotations.
Yes. We routinely fabricate bespoke designs from sketches, photo references, or technical architect drawings. Specify your target dimensions (width × depth × height), wood selection (solid teak or mahogany), and desired finish (natural raw, polyurethane lacquer, or solid color duco). Our engineering team reviews joints, checks wood grain alignment, and supplies written proforma quotations within 24 to 48 hours.
Our standard commercial order unit is one 20ft container (approximately 28–30 CBM), which maximizes container freight efficiency per piece. However, smaller orders are welcome when the total cubic meter volume makes financial sense to export. We regularly load half-containers or prepare palletized LCL shipments for buyers consolidating cargo with other Indonesian factories.
Typical production requires approximately 4 to 6 weeks per 20ft container, depending on the complexity of carving, integrated aluminum frameworks, or electrical fittings. The firm production timeline is agreed upon and committed to in writing in your official proforma invoice prior to commencing lumber selection.
For multi-container hospitality projects, a 30% initial deposit on the complete project is settled upon order placement to procure raw timber. Each scheduled container is then paid in full only after our dual QC inspectors finish inspections and you have formally approved high-resolution photos and video documentation of each completed piece before container loading.
Yes. All timber processed in our factory is 100% verified under Indonesia’s national SVLK (Sistem Verifikasi Legalitas Kayu) certification system. This guarantees that your goods come with official V-Legal export documents, satisfying the EU Timber Regulation (EUTR), the Lacey Act (USA), and incoming EUDR requirements with zero risk of customs confiscation.
We specialize in sustainable Indonesian solid teak (Tectona grandis) and certified mahogany. Available finishes include natural fine-sanded oil finish (highlighting the wood's organic grain and golden honey luster), protective weather-resistant melamine lacquer, polyurethane exterior coatings, or multi-stage duco spray paint in your exact RAL or Pantone color codes.
Yes, you are warmly invited. Our workshop is located at Jl. Raya Soekarno Hatta KM.5 No.95, Jepara 59451, Central Java, Indonesia. We are open for visits daily from 08:00 to 16:00 WIB. We request that you message our team in advance so our directors can clear their schedule to walk you through our lumber drying kilns, joinery floor, and packing lines.
Yes. We routinely arrange sea freight from the Port of Tanjung Emas (Semarang, Central Java) to major global ports in North America, Europe, Australia, and the Middle East. Over our 30-year operational history, we have successfully exported hundreds of containers to commercial distributors and hospitality procurement agencies in Germany, the USA, and New Zealand.
Because we build made-to-order contract furniture rather than rigid mass-market stock, each project's unit price depends on raw timber grades, exact customized dimensions, choice of finish, electrical integration, and packing requirements (e.g., ISTA-3A e-commerce drop-test packaging vs. high-density container wraps). We provide transparent, itemized quotes reflecting your exact order criteria.
Send our Jepara engineering workshop your drawings, material schedules, or collection reference codes. Receive a direct factory written quotation and production analysis within 24 hours.
Get a Quote